Maxtor AP-12 Thermal Pad for GPU VRAM, Laptop and Electronics Repair
Maxtor AP-12 is a gray thermal pad rated at 14.8 W/mK. Multiple sheet sizes and thicknesses make it suitable for filling gaps between heat-generating components and cooling surfaces in GPU, CPU-adjacent and laptop repair applications.
-
14.8 W/mK thermal conductivity for performance-focused thermal transfer.
-
Six thickness options from 0.5 mm to 3.0 mm.
-
Three sheet sizes for small repairs, long components or larger custom cuts.
-
Non-electrically conductive and non-curing according to product specifications.
Available Sizes
| Sheet sizes |
85 x 45 mm, 120 x 20 mm, 120 x 120 mm |
| Thicknesses |
0.5, 1.0, 1.5, 2.0, 2.5 and 3.0 mm |
| Thermal conductivity |
14.8 W/mK |
| Color |
Gray |
| Listed shelf life |
5 years |
Recommended Uses
- GPU memory and VRM thermal pad replacement
- Laptop heat-sink gap filling
- Desktop and workstation component servicing
- Custom-cut electronics repair applications
Before You Order
Measure the original pad thickness before selecting a replacement. A pad that is too thin may not make full contact; a pad that is too thick can prevent correct cooler mounting. Match the original dimensions whenever possible.
Installation
- Power off and disassemble the device according to its service guide.
- Measure the original pad and clean the contact surfaces.
- Cut the AP-12 sheet to the component footprint.
- Remove protective films and place the pad without stretching it.
- Reassemble with even pressure and confirm proper contact.
