Maxtor AP-14 120 x 120 mm Thermal Pad for GPU and Laptop Repair
Maxtor AP-14 is a large-format 120 x 120 mm thermal pad rated at 16.8 W/mK. Cut the sheet to fit GPU memory, VRM, laptop and other component-to-heat-sink gaps.
-
16.8 W/mK thermal conductivity for performance-focused thermal transfer.
-
120 x 120 mm sheet provides flexible coverage for custom cuts.
-
0.5, 1.0 and 1.5 mm thicknesses for different component gaps.
-
Repair-friendly format for desktops, workstations, GPUs and laptops.
Specifications
| Model |
AP-14 |
| Thermal Conductivity |
16.8 W/mK |
| Sheet Size |
120 x 120 mm |
| Thickness Options |
0.5 mm, 1.0 mm, 1.5 mm |
Before You Order
Confirm the original pad thickness before purchase. Correct thickness is essential for component contact and cooler mounting. Do not stack pads unless the equipment service procedure specifically requires it.
Installation
- Power off and disassemble the device using its service guide.
- Measure the original pad and clean the contact surfaces.
- Cut the AP-14 sheet to the required footprint.
- Remove the protective films and place the pad without stretching it.
- Reassemble with even pressure and verify proper cooler contact.
