Maxtor CTG8 thermal grease retail pouch front and back

Load image into Gallery viewer, Maxtor CTG8 thermal grease retail pouch front and back

Load image into Gallery viewer, Maxtor CTG8D 1g thermal paste

Load image into Gallery viewer, Maxtor CTG8D 2g thermal paste

Load image into Gallery viewer, Maxtor CTG8D 4g thermal paste

Load image into Gallery viewer, Maxtor CTG8 Thermal Grease — 12.8 W/mK

Maxtor CTG8 Thermal Grease — 12.8 W/mK

Name: Maxtor CTG8 Thermal Grease — 12.8 W/mK
Brand: Maxtor-si
SKU: CTG8D-1G
Price: 5.99 USD
Availability: InStock

Maxtor-si

$5.99

Tax included.

size

Quantity

Description

Maxtor CTG8 Thermal Grease

CTG8 is a non-electrically-conductive thermal grease for CPU, GPU, laptop and desktop PC maintenance where the original interface calls for thermal grease. Available package sizes are shown in the live product variants.

Verified specifications

Customer-facing model	CTG8
Thermal conductivity	12.8 ± 0.5 W/mK
Density	2.5 ± 0.1 g/ml
Operating temperature	-50 to 250 °C
Electrical conductivity	None
Shelf life	5 years at 25 °C
Available sizes	1 g, 2 g and 4 g

Installation checklist

Power off the equipment and follow the device or cooler manufacturer's service instructions.
Remove the existing interface material using a method approved for the contact surfaces.
Apply CTG8 only where the assembly specifies thermal grease, then reinstall the cooler with even mounting pressure.

Thermal grease is not a substitute for a thick gap-filling pad. Actual results depend on hardware, surface condition, mounting pressure and application method.

Request the CTG8 TDS or MSDS for technical evaluation.

How to Apply

How to Apply Maxtor Thermal Paste - Step by Step

Read instructions before starting. Every brand of thermal paste and CPU cooler is a little different.
Apply thermal paste onto the center of the CPU’s IHS. You only need to apply a small amount — roughly the size of a grain of rice or a pea — onto the center of the integrated heat spreader.
Install CPU cooler. Use light, top-down pressure to place the base-plate or waterblock of your cooler onto the CPU, and hold that pressure while attaching the cooler to the mounting mechanism.
Double-check your work. There shouldn’t be any thermal paste spilling over the edges of the CPU, or anywhere on the motherboard. If there is, it means you used too much thermal paste, and should clean it off with alcohol and start the process again.

Use video

SGS Report

China warehouse inventory

This variant is currently stocked in China. Shipping options and costs are confirmed at checkout.

Technical evidence

TDS-verified specifications and application context

Price, inventory, variants, cart and checkout above remain controlled by Shopify. Conductivity alone does not determine material suitability.

Technical specifications

Thermal conductivity: 12.8 ± 0.5 W/m·K
Operating temperature: -50 to 250 °C
Thickness: Not applicable or interface dependent

Application context

Data centers
PC systems
Electronics repair

CTG8D is the storefront designation for CTG8 and uses the confirmed CTG8 TDS. Final suitability requires interface review.

Request TDS Request SDS Bulk purchase inquiry